Alabama Oversize Permits
Oversize Permits: Alabama oversize permits are substantial for five consecutive days, Should have a permit going before entering the state.
Alabama (AL) Oversize (OS)/ Overweight (OW) permits & Trucking Services across USA and Canada
Compare Transport LLC is an approved licensed broker bearing Department Of Transportation number(DOT) 701497 and Motor Carrier Number(MC) 586860 that offers Hassle-free trucking and Oversize/overweight Permits for the USA & Canada. Compare transport LLC’s experienced transportation permit specialists comprehend the size, height, and weight requirements for obtaining oversized load permits in all 50 U.S. states, Canadian provinces, and local jurisdictions. Our main goal is to get your truck permits as quickly as possible.
Get your transportation needs like International Fuel Tax Agreement (IFTA) Decals & Renewal, International Registration Plan (IRP) Plates, Motor Carrier Authority (MC) from us, Unified Carrier Registration (UCR), Corporation Filing, Standard Carrier Alpha Code (SCAC) renewal, and also offer services like New Mexico Permit, Kentucky Permits, Oregon permits, New York Hut, Vehicle Identification Number, BOC3 Filing contact Compare Transport LLC.
Get your permits by calling us at ☎ 630-222-5770.
Alabama Oversize/Overweight Permits: Alabama oversize permits are substantial for five consecutive days, Should have a permit going before entering the state.
Alabama (AL) Schedule Time : Daylight only (one-half hour before dawn to a one-half hour later nightfall) Monday through Saturday. No movement on Sundays.
Travel Restrictions: No movement on significant occasions and Holiday ends of the week.
Alabama (AL) Oversize/ Overweight Permit Legal Dimensions:
Length: 57 feet trailers
53 feet- 6 inches on streets under 12 feet wide
85 feet overall (unless the trailer exceeds 57 feet)
Overhang: 10 feet front, 5 feet rear
Please Note: 60 feet Structural steel is exempt from permits and escorts
Width: 8 feet 6 inches (8 feet on way paths under 12 feet wide)
Height: 13 feet 6 inches
Weight: 80,000 Gross
Single – 20,000 pounds
Tandem – 34,000 pounds
Tridem – 42,000 pounds
Alabama (AL) Oversize/ Overweight Routine Permit Limits:
Length: 150 feet (maximum overhang 20 feet)
Overhang: 20 feet back overhang is the most extreme allowed.
Width: 16 feet (over 16 feet cannot use Interstate)
Height: 16 feet
5 axles – 102,000 pounds
6 axles – 124,000 pounds
7 axles – 146,000 pounds
8 axles – 168,000 pounds
Maximum without special permission
Steer – 14,000 pounds
Single – 22,000 pounds
Tandem – 44,000 pounds
Tridem – 66,000 pounds
Quad – 88,000 pounds
Note: If any Load exceeds the above dimensions, over 180,000 pounds are Super Loads.
Alabama (AL) Oversize/ Overweight Escort Requirements (PILOT CARS):
Length: With legal trailer length
over 90 feet – 1 escort
over 105 feet – 2 escorts
Trailer length over 57 feet – 1 back escort
Overhang: over 5 feet back overhang – 1 escort.
Width: over 12 feet – 1 escort.
Height: over 16 feet * – 1 escort *(may be required at lower heights on certain routes)
Bucket or Blade Rule in Alabama: If bucket or blade extends past the trailer’s sides at 12 feet wide – 1 escort. (No escort needed assuming outriggers are utilized to prevent bucket or blade from distending sides of trailer).
Miscellaneous: Bulldozers, front-end loaders, and similar equipment shall be loaded with the blade to the back any time the blade protrudes beyond the transporting vehicle.
The overweight dozer and blade should be attached, or else dragged on separate loads if the blade is disconnected.
60 feet Structural steel is free from permits and escorts.
SIGNS, FLAGS & LIGHTS: “Oversize Load” signs front and back of any over width or length vehicle. Flags must be placed at the front and back corners of an over-dimensional load or vehicle. Over 4 feet back overhang requires lights at night. (Over 5 feet requires a permit, and can’t run at night). There are no signs or flag necessities for over height only or overweight only loads.
Alabama Blade and Bucket Rule: 2 pilot cars are needed at 12 feet in Alabama any time a blade or bucket protrudes past the edges of the trailer. This applies to dozers, excavators, and some other equipment with a blade or bucket. Also, the blade or bucket must be loaded to the back.
Heavy Hauling Trucking Services in Alabama – Contact Us Today
Heavy haul trucking is the hauling of oversize or overweight freight. By and large, shipping heavy equipment will require specific trailers that can haul over-dimensional or overweight loads. Heavy equipment hauling requires a specialist to decide on the right trailer to get everything taken care. Searching for Heavy Haul shipping administrations that can deal with huge loads and heavy freight? Look no farther than Compare Transport LLC, a believed heavy haul Lowboy administration with many years of involvement. Our drivers are exceptionally prepared and are focused on giving protected, proficient transportation on time without fail.
HEAVY HAUL TRUCKING KNACK
Our particular group can haul any load you have, no matter what it’s dimensions may be. We will transport anything you really want any place in the USA & Canada. With broad involvement with uncompromising heavy-duty hauling and specialized equipment like cranes and other large equipment, we are prepared to deal with even the most difficult activities.
Ordering an Oversize/Overweight Permit & Trucking Company
Oversize Permits by State
Alabama | Alaska | Arizona | Arkansas | California | Colorado | Connecticut | Delaware | Florida | Georgia | Hawaii | Idaho | llinois | Indiana | Iowa | Kansas | Kentucky | Louisiana | Maine | Maryland | Massachusetts | Michigan | Minnesota | Mississippi | Missouri | Montana | Nebraska | Nevada | New Hampshire | New Jersey | New Mexico | New York | North Carolina | North Dakota | Ohio | Oklahoma | Oregon | Pennsylvania | Rhode Island | South Carolina | South Dakota | Tennessee | Texas | Utah | Vermont | Virginia | Washington | West Virginia | Wisconsin | Wyoming